Dilution Mixing Calculator

How the Dilution Mixing Calculator Works

This calculator has two modes. The mixing mode combines two solutions with different strengths and estimates the final concentration. The dilution mode calculates how much water or another 0% solution must be added to lower a starting concentration to a target level.

Use the same volume unit for every entry. Gallons, liters, quarts, or ounces all work as long as the units remain consistent.

Why Consistent Units Matter

The math compares concentration and volume. Mixing gallons with quarts or liters without converting them first will produce the wrong result. Keep every volume entry in one unit from start to finish.

When This Tool Is Useful

• Comparing two liquid chlorine strengths.
• Diluting a known solution with water.
• Estimating the final concentration after combining products of the same chemical type.
• Planning small test batches.
• Checking proportional mixing math.

Common Dilution Mistakes

• Mixing incompatible chemicals.
• Using different volume units in the same calculation.
• Entering a target concentration higher than the starting concentration in dilution mode.
• Assuming all percentages are measured the same way.
• Ignoring product labels and safety instructions.

Frequently Asked Questions

Can I use this calculator for any pool chemical?

The math works for concentration and volume, but chemical compatibility and safe handling must come from the product label. Never combine products just because the math works.

Can I mix two different chlorine strengths?

Only when they are compatible forms of the same product and the labels allow it. Never mix different chlorine types together.

Why must the target be lower in dilution mode?

Adding water or a 0% solution can only reduce concentration. It cannot make the solution stronger.

Does this account for chemical reactions?

No. It assumes simple mixing with no reaction, heat release, density change, or volume contraction.